Description
Winter storage tent 8x12m
SD Cover
The cover material is PVC. Weight of the tarp approx. 560 g/m². Resistant to temperatures from -40 ℃ to +60 ℃. UV resistant. The tarp is secured with strong rubber bands + Velcro. Hermetic system (tent sealing). Air-Control system (prevents water condensation inside the tent). Retention barrier (water drainage). Sealing Velcro 100% waterproof.
Winter construction
The construction features a solid frame made of galvanized pipes with a diameter of approx. 50 mm.
Material 100% galvanized steel. Corrosion protection by hot-dip galvanizing. Diameter of construction pipes approx. 50 mm - increases durability. Thickness of construction pipes approx. 1.6 mm. Diameter of fasteners approx. 54 mm. Thickness of fasteners approximately 1.3 mm. Additional roof and floor construction. Mounting screws. Enlarged legs with a diameter of approx. 14 cm.
Two entrances/driveways, width 3.83 m x height 2.59 m.
Slide and Roll system (allows shifting the entrance/driveway to the side or rolling it up). Over Top system (higher entrance/driveway than wall height).
Product description
The construction is solid and easy to assemble. This allows the tent to be easily relocated to any place in addition to quick setup. The tent is ideal for storing various types of materials. It can be used as a roof for parking, garage, storage for machines or boats, as a car wash and paint shop. Additionally, it can also be used as a commercial tent that can become a mobile sales point.
New convenient opening:
1. New Slide & Roll system. Each entrance has three locks that divide it into two independent segments that can be shifted to the sides or rolled up. This allows one person to open the entrance.
2. The Over Top system increases the entrance. By using a special notch in the roof, you get a HIGHER ENTRY than the side wall.
Each entrance has three locks that divide it into two independent segments. This allows you to:
Open just one part. Open the entrance in both directions. Pack one part or all. Get an entrance the full width of the tent.
PVC cover 560g/m2 MSD
1 - roof SD PVC (polyvinyl chloride) 560 g/m2, 2 - double ventilation on both sides, 3 - Slide and Roll entrances, 4 - strong YKK zippers at the entrances, 5 - sealing with Velcro, 6 - removable panels with Velcro sealing, 7 - side walls SD PVC approx. 2 x 2 m (polyvinyl chloride) 500 g/m2, 8 - additional retention barrier.
Innovative material production technology
1. PVC layer
2. Mesh inserted between PVC layers
3. PVC layer
4. Paint layer
The tarp made of coarse material ensures tightness and durability. It is resistant to UV radiation and temperature fluctuations. Provides water resistance and prevents condensation.
Tear resistance: 2400/2300 N/5 cm
Temperature range: -40 °C to +60 °C.